I am using Smart Gnns SPS985L with JunoT41 Controller.I want create new datum for our project.Not included in SCS900 sofware.How can I do that?
Please find attached our Local datum geodetic parameters.
Hi,
You need to set your new Datum using the Coordinate System Manager. Add new Datum and new coordinate system. Save the file with the same name of your SCS900, usually is current.csd then copy and paste in the folder where the files of SCS900 are.
I did that. You can have a look. Datum is BURAK, Cordinate System is BURAK51
https://drive.google.com/file/d/1Cs9mafCri30J9L1ZMyPLSy3IXsOVFv9G/view?usp=sharing
Regards.
Thank you very much for your help
On 17 Jan 2019 Thu at 22:23 espinoza_miguel@sitech-panama.com <
Hi Miguel,
i have the same Problem.
Save the file with the same name of your SCS900, usually is current.csd then copy and paste in the folder where the files of SCS900 are.
I don't know where this folder is.
I tested it in the Trimble SCS Data Order
Hi Markus,
Which controller and field software are you using?