Trimble Business Center

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

I recommend reaching out to Alan Sharp at alan.sharp@rockpilesolutions.com +1 720-323-0481 
@Alan Sharp
@Alan Sharp
@Alan Sharp
(sorry 3 Alans come up don't know which is correct to tag)​​​

------------------------------
Richard Tyndall
------------------------------

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

Thank you, Richard!

------------------------------
Katie Byron
------------------------------

Original Message:
Sent: 04-28-2021 06:19
From: Richard Tyndall
Subject: TBC Drafting Training

I recommend reaching out to Alan Sharp at alan.sharp@rockpilesolutions.com +1 720-323-0481 
@Alan Sharp
@Alan Sharp
@Alan Sharp
(sorry 3 Alans come up don't know which is correct to tag)​​​

------------------------------
Richard Tyndall

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

Katie
As Richard kindly mentioned me / us, we can help you here - send me an email if you would like us to follow up with you (alan.sharp@rockpilesolutions.com) - we have an advanced drafting class that goes through this in detail and we can assist you with some of the finer points on this stuff for sure. I developed a set of Templates that you may also find helpful - at least as a starting point to get this set up right.

Alan

------------------------------
Alan Sharp
alan.sharp@rockpilesolutions.com
------------------------------

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

Thanks for reaching out, Alan. I will send you an email.

------------------------------
Katie Byron
------------------------------

Original Message:
Sent: 04-28-2021 06:25
From: Alan Sharp
Subject: TBC Drafting Training

Katie
As Richard kindly mentioned me / us, we can help you here - send me an email if you would like us to follow up with you (alan.sharp@rockpilesolutions.com) - we have an advanced drafting class that goes through this in detail and we can assist you with some of the finer points on this stuff for sure. I developed a set of Templates that you may also find helpful - at least as a starting point to get this set up right.

Alan

------------------------------
Alan Sharp
alan.sharp@rockpilesolutions.com

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

Hi Alan,

I'm not too bad with some of these section template settings myself, but also would like a deeper understanding of what can be done in terms of labelling, etc.. Please also send me info on when the next draughting course is taking place.

Regards, Richard.

------------------------------
Richard Selby
------------------------------

Original Message:
Sent: 04-28-2021 06:25
From: Alan Sharp
Subject: TBC Drafting Training

Katie
As Richard kindly mentioned me / us, we can help you here - send me an email if you would like us to follow up with you (alan.sharp@rockpilesolutions.com) - we have an advanced drafting class that goes through this in detail and we can assist you with some of the finer points on this stuff for sure. I developed a set of Templates that you may also find helpful - at least as a starting point to get this set up right.

Alan

------------------------------
Alan Sharp
alan.sharp@rockpilesolutions.com

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

Have you looked through trimble YouTube training videos?

------------------------------
Robert Hoy
------------------------------

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------

I haven't seen too much on there for the more in depth stuff.

------------------------------
Katie Byron
------------------------------

Original Message:
Sent: 04-30-2021 17:03
From: Robert Hoy
Subject: TBC Drafting Training

Have you looked through trimble YouTube training videos?

------------------------------
Robert Hoy

Original Message:
Sent: 04-27-2021 15:27
From: Katie Byron
Subject: TBC Drafting Training

Does anybody have any training course recommendations for the real advanced drafting portions of TBC? We have the basics and what most courses offered (that I have come across so far) consider as "advanced drafting" down enough to make up our own templates to get by. We're now trying to simplify the auto labelling in the plan-profile and cross-section sheets so that there are less things to move around and adjust when we build sheets (real pain if you have to make a minor adjustment and have to redo all of your shifting around/minor annotations of things once you re-build sheets). We now need a better understanding of the labelling options and how to run the filters on them (referenced lines, node/segment/interval/curve tables/profile tables, etc., the help section isn't very helpful in these areas).

Thanks in advance!





------------------------------
Katie Byron
------------------------------