Trimble Business Center

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

That's great. Any ETA on when the download will be available? I'm still only seeing 2025.10

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------

Thanks Thomas. Im still on .10 like the others. Hopefully .11 will be pushed out soon. Seems it hasnt been pushed public yet.

https://help.fieldsystems.trimble.com/tbc/release-notes.htm

------------------------------
Seth Zora

Original Message:
Sent: 10-04-2025 08:18
From: Thomas Widmer
Subject: 2025.10 only importing ortho in meters?

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------

I believe 2025.20 will be formally released within a couple of weeks. This will have the fix that you are expecting, as I have confirmed this with Trimble Geospatial support.

Thanks Thomas. Im still on .10 like the others. Hopefully .11 will be pushed out soon. Seems it hasnt been pushed public yet.

https://help.fieldsystems.trimble.com/tbc/release-notes.htm

------------------------------
Seth Zora

Original Message:
Sent: 10-04-2025 08:18
From: Thomas Widmer
Subject: 2025.10 only importing ortho in meters?

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------

I sure wish they would push this update or at least a dot update that addresses this issue.

I believe 2025.20 will be formally released within a couple of weeks. This will have the fix that you are expecting, as I have confirmed this with Trimble Geospatial support.

Thanks Thomas. Im still on .10 like the others. Hopefully .11 will be pushed out soon. Seems it hasnt been pushed public yet.

https://help.fieldsystems.trimble.com/tbc/release-notes.htm

------------------------------
Seth Zora

Original Message:
Sent: 10-04-2025 08:18
From: Thomas Widmer
Subject: 2025.10 only importing ortho in meters?

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------

Seth,

Hang in there! I believe the formal release should be in replace by end of next week. We'll see. 

I sure wish they would push this update or at least a dot update that addresses this issue.

I believe 2025.20 will be formally released within a couple of weeks. This will have the fix that you are expecting, as I have confirmed this with Trimble Geospatial support.

Thanks Thomas. Im still on .10 like the others. Hopefully .11 will be pushed out soon. Seems it hasnt been pushed public yet.

https://help.fieldsystems.trimble.com/tbc/release-notes.htm

------------------------------
Seth Zora

Original Message:
Sent: 10-04-2025 08:18
From: Thomas Widmer
Subject: 2025.10 only importing ortho in meters?

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------

The new release came out yesterday. I ran the cleanup utility and installed 2025.20 today. I'm going to test and confirm if the erroneous assignment of UAS orthos (upon import from the create deliverable step) in metric went away. 

Seth,

Hang in there! I believe the formal release should be in replace by end of next week. We'll see. 

I sure wish they would push this update or at least a dot update that addresses this issue.

I believe 2025.20 will be formally released within a couple of weeks. This will have the fix that you are expecting, as I have confirmed this with Trimble Geospatial support.

Thanks Thomas. Im still on .10 like the others. Hopefully .11 will be pushed out soon. Seems it hasnt been pushed public yet.

https://help.fieldsystems.trimble.com/tbc/release-notes.htm

------------------------------
Seth Zora

Original Message:
Sent: 10-04-2025 08:18
From: Thomas Widmer
Subject: 2025.10 only importing ortho in meters?

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------

I did provide some testing for this import with several datasets. If you do notice an issue, please reach out!

The new release came out yesterday. I ran the cleanup utility and installed 2025.20 today. I'm going to test and confirm if the erroneous assignment of UAS orthos (upon import from the create deliverable step) in metric went away. 

Seth,

Hang in there! I believe the formal release should be in replace by end of next week. We'll see. 

I sure wish they would push this update or at least a dot update that addresses this issue.

I believe 2025.20 will be formally released within a couple of weeks. This will have the fix that you are expecting, as I have confirmed this with Trimble Geospatial support.

Thanks Thomas. Im still on .10 like the others. Hopefully .11 will be pushed out soon. Seems it hasnt been pushed public yet.

https://help.fieldsystems.trimble.com/tbc/release-notes.htm

------------------------------
Seth Zora

Original Message:
Sent: 10-04-2025 08:18
From: Thomas Widmer
Subject: 2025.10 only importing ortho in meters?

Hi Seth the dev team fixed it for v2025.11 and the QA team confirmed it with data from different 3rd party products. In case you still face the issue, let us know.

The corresponding ticket is: SYMPHONY-19104

------------------------------
Thomas Widmer

Original Message:
Sent: 10-02-2025 09:52
From: Seth Zora
Subject: 2025.10 only importing ortho in meters?

Anyone heard anything about a fix coming soon? I seeing this was from July and Im still having this same issue in October.

------------------------------
Seth Zora

Original Message:
Sent: 07-31-2025 09:18
From: Craig Amey
Subject: 2025.10 only importing ortho in meters?

Just ran into this problem myself.  I thought I was going nuts.  I took me a while to realize what was happening, and then determine it was a 2025.10 thing.  I agree, a fix is needed soon, very soon.  Fortunately, I have GCPs in my tifs so I am using the georef tool in TBC to scoot the tif back to the correct location.  It's not quite as accurate as directly importing the tif.  I probably have 0.2' - 0.3' kicking around, but close enough.  Definitely better that +/- 5000 miles.

------------------------------
Craig Amey

Original Message:
Sent: 07-24-2025 06:25
From: Scott Cavendish
Subject: 2025.10 only importing ortho in meters?

My orthos are created in Pix4DMatic in US Survey Feet and they are now coming into TBC in meters only. Trimble needs to push a fix for this.

------------------------------
Scott Cavendish

Original Message:
Sent: 07-23-2025 15:50
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Ahh. I was thinking that you produced the ortho in the TBC photogrammetry module. If coming from DJI Terra, it should come in fine. I have seen nowhere in Terra where you can choose the type of ortho other than 2D Map slider bar on and low, medium, or high, haha. I will bring in an ortho that I produced in Terra and report back. Trimble is on it and they are actively working on a fix. If the ortho coming out of DJI Terra is a standard TIF/GeoTif, there should be no issues. Given you are having issues, I am thinking that it is indeed a JPEG compressed Tiff with transparency which is why TBC is choking on it (erroneously interpreting meters no matter what). 

------------------------------
Zach Edwards

Original Message:
Sent: 07-23-2025 06:47
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

Thank you.  Is the transparency setting only found by selecting the TIFF from the imported files pane, then choosing properties?  Because it is already set to No in the Transparent Background field in Properties.  Or is there another setting somewhere like the import editor? 

As far as importing a non-compressed TIFF, I don't know if I'm able to do that.  The ortho was created in DJI Terra, and I'm assuming it's compressed if I'm having this issue like you say.   

------------------------------
Jeff Niehaus

Original Message:
Sent: 07-22-2025 07:12
From: Zach Edwards
Subject: 2025.10 only importing ortho in meters?

Jeff,

I ran into this as well. It's a small bug in 2025.10. You can fix this without rolling back to the previous version. The issue is specifically with the TIFF w/ JPEG compression when the "Transparent Background" is checked. If you turn off the transparent background OR use a regular (non-compressed) tif, it will work just fine. I confirmed this with Trimble support over the past few days. 

------------------------------
Zach Edwards

Original Message:
Sent: 07-21-2025 09:37
From: Jeff Niehaus
Subject: 2025.10 only importing ortho in meters?

I just updated TBC to 2025.10, and it is not importing an ortho file (tif) in US feet.  In the warning report link, it says that it couldn't be imported in US feet, and so it imports in meters.  Is this a bug or is there a setting I need to change?  It worked fine in the previous version.  

------------------------------
Jeff Niehaus
------------------------------