Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

TTM not working with SCS900/Siteworks

  • 1.  TTM not working with SCS900/Siteworks

    Posted 01-29-2023 23:06
    Hello,

    Im hoping someone might be able to help me out with an issue I'm having with an error message from a TTM.

    I currently have 3 designs SG, SB, BC. Only the Subgrade TTM works in the SCS900. The Subbase and Basecourse do not.
    I have tried to remove any flags within TBC (just a couple tiny break-line issues). This hasn't worked when I've tried exporting the TTM again.
    What I don't understand is why the subgrade TTM works but the BC and the SB don't. The BC doesn't show any errors within the model. 

    If someone could give some insight, that would be greatly appreciated.

    I have attached the files in question.

    Cheers

    ------------------------------
    Duan Jordaan
    ------------------------------


  • 2.  RE: TTM not working with SCS900/Siteworks

    Posted 01-30-2023 13:55
    You did not add the files.

    ------------------------------
    Ronny Schneider
    ------------------------------

    Original Message