With 2026.10, it seems like I do not have the option to be able to set the spatial setting on how often I want a grid point placed, i.e., 10ft, 2ft, etc. Did this move somewhere?
Dear WorksManager Users, Please be advised that scheduled maintenance is planned for this coming Sunday, 4:30 AM–6:30 AM UTC . During this maintenance window, RA functionality will be temporarily unavailable and users may experience service disruptions. We will provide an update...
This is a weird workaround, but you can create a large rectangle at the desired elevation then create a temporary surface from that rectangle. Then you can create a surface tie to that temp surface from your original line. I think that’s what you want
I'd use "Sideslopes" for this, they automatically recompute. You'll have the full range of corridor instructions. Beware, a Sideslope only creates linework for material layer "Finish", but you can use other material layers for temporary elevation computations. They don't require an alignment, a...
Hi all, Is there any way I can offset a simple 3D line, left or right at a specific slope/gradient to an elevation. I want TBC basically calculate the distance based on the slope and target elevation. I can only offset by an inputted distance at a slope / gradient currently, which TBC caluclates...
Hi all, I have scanned a large road project with an X9, placing control every 100m with GNSS. I registered cloud-to-cloud in the field, then imported to realworks and refined using the control points captured in the scan (Adjust Registration using 'TopoPoints' survey control as the reference)....
Does your alignment have a vertical component? Make sure the vertical alignment is selected in the corridor properties. If you created the vertical alignment manually, after you created the corridor, it can be that this field is unpopulated.